BUNTING BEARINGS DPEP101418 Bearings

d1:83 mm; Designation of housing:FS311-; B:55.6 mm; A1:20 mm; J:140 mm; d:55 mm; Designation of bearing:EX311G2T04; A:52 mm; L:185 mm; B1:73 mm;

Nlim:3,500 rpm; Number of lubrication holes:3; B:64 mm; k:5 mm; Dynamic load, C:668 kN; Y1:2.06; d2:110.1 mm; Nref:3,000 rpm; D:190 mm; Da max:176 mm;

Designation of bearing:UC205-14G2L3; Designation of housing:P205N-; B:34 mm; T min.:-20 °C; J:105 mm; A1:26 mm; L1:42 mm; H:36.5 mm; d:22.22 mm; N:13mm;

ALP22:0; C_conv:65000; Prod_Type3:ACBB_SR_MM_DF; r:1.5; D_:80; LangID:1; SRI:7.02; ALP23:0; SDM_:57.495; Oil rpm:6700;

Brand:NTN; d:15 mm; Characteristic outer ring frequency, BPF0:2.61 Hz; Static load, C0:3.6 kN; Min operating temperature, Tmin:-25 °C; Max operating temperature, Tmax:110 °C; Characteristic rolling element frequency, BSF:3.68 Hz; Nlim (grease):15,000 rpm; da min:19 mm; Mass:0.04 kg;

Recommended tightening torque for set screw:5.5 Nm; H2:64 mm; G:R1/8"; J:97 mm; T max.:100 °C; d:15 mm; Designation of open end cover:SCO204-15; Z:43.9 mm; Designation of housing:PE204N-; C0:6.65 kN;

Mass (without HJ ring):0.46 kg; Weight / Kilogram:0.431; da min:51.5 mm; E:76.5 mm; Inventory:0.0; Brand:NTN; Fatigue limit load, Cu:8.1 kN; dc min:61 mm; B:19 mm; Da max:78.5 mm;

S:17.4 mm; d:25.4 mm; H1:10 mm; T min.:-40 °C; H:36.5 mm; s1:30.9 mm; Designation of housing:PAE205-; H2:70 mm; T max.:100 °C; N:M10;

ALPHA_:15; r:1.1; SDM_:64.943; SRI:6.6; SBRG:2; D_:85; SREN:0; ALP21:15; B_:19; D_a:78;

Min operating temperature, Tmin:-25 °C; d:28 mm; Radial clearance class:CN; B:12 mm; rNs min:0.5 mm; Snap ring reference:R52; f0:14.5; Brand:NTN; Characteristic inner ring frequency, BPFI:5.89 Hz; Max operating temperature, Tmax:110 °C;

Designation of bearing:EX204G2L4; L1:40 mm; C:12.8 kN; B:34 mm; A:32 mm; B1:43.5 mm; d1:32.4 mm; s1:30.5 mm; H2:64 mm; Designation of open end cover:SCOE204-20;

Separable:Inner Ring - One Sid; dc min:112 mm; Nlim (grease):3,400 rpm; Other Features:1 Rib Inner Ring | 2; Minimum Buy Quantity:N/A; UNSPSC:31171547; da min:83 mm; Manufacturer Item Number:NJ414G1C3; D:180 mm;

T max.:200 °C; C0:29.2 kN; A2:58.4 mm; A1:18 mm; Weight:3.41 kg; Designation of open end cover:SCOU211-35; s1:27.8 mm; Designation of housing:F211N-; N:19mm; L:162 mm;

Radial clearance class:C3; Da max:276 mm; Max operating temperature, Tmax:200 °C; d:160 mm; Number of lubrication holes:3; D:290 mm; Characteristic outer ring frequency, BPF0:7.6 Hz; Nref:2,000 rpm; ra max:2.5 mm; Min operating temperature, Tmin:-40 °C;

B1:43.5 mm; C0:6.65 kN; A:25 mm; G:R1/8"; S:17 mm; E:21 mm; T max.:100 °C; C:12.8 kN; B:34 mm; SW:3 mm;