FYH SAPP20618 Bearings

SW:3.97 mm; G:M6x1; L2:14 mm; Designation of housing:T305-; B1:46.8 mm; Recommended tightening torque for set screw:8 Nm; C:22.36 kN; H1:80 mm; d:22.22 mm; N2:36 mm;

Mass:0.02 kg; Axial displacement K Factor:1.03; d1:21 mm; d:17 mm; d2:20.05 mm; Preload value:0.05 kN; Contact angle α:25 °; Characteristic outer ring frequency, BPF0:8.03 Hz; Fatigue limit load, Cu:0.08 kN; da min:19.5 mm;

S:41 mm; G:M10x1; L:290 mm; A:94 mm; e:59 mm; N:35mm; Designation of bearing:UC319G2; Designation of housing:F319-; s1:51.5 mm; A2:121 mm;

B:31 mm; T max.:100 °C; A:25.5 mm; S:12.7 mm; L:86 mm; e:15 mm; Dz:54 mm; A2:33.3 mm; Z:36.6 mm; C0:6.65 kN;

D2:83.87 mm; f0:14.56; D6:66.7 mm; Preload level:8; Nlim (grease):15,000 rpm; Radial rigidity:588 N/µm; Da max:83 mm; Axial rigidity:124 N/µm; ra max:1 mm; Static load, C0:34 kN;

Ball Material:Steel; End Cap Groove:Yes; Housing Material:Cast Iron; Bearing Locking Device:Setscrew; Ring Size:Standard; Flinger Type:Rubberized; Self Aligning:Self Centering; UPC:782475115174; Bearing Outer Ring Material:Steel; Retainer Material:Nylon;

Grease Type:Mobilgrease XHP222; Setscrew Angle:65; Housing Product Type:K / DI; d:3.4375 in; Bearing Insert Material:Steel; Housing Type:2 Bolt Pillow Block; Brand:Baldor-Dodge; Seal Type:Triple Lip; Bearing Bore Shape:Tapered; Expansion Type:Non-Expansion;

d:12.7 mm; SW:3.18 mm; S:12.7 mm; L3:38 mm; H:65 mm; T min.:-20 °C; G:R1/8"; C:12.8 kN; Weight:0.61 kg; L:91 mm;

Expansion Type:Non-Expansion; Bearing Bore Shape:Round; Bearing Locking Device:Concentric Clamp Col; Flinger Type:INTERNAL RUBBER LIP; Bearing Insert Material:Nickel-Coated Steel; Bearing Duty:Normal Duty; Retainer Material:Polymer; Bearing Series:205 Series; Ball Bearing Housing Series:205 Series;

H:161 mm; A2:51.3 mm; A1:14 mm; e:19 mm; Weight:1.36 kg; B1:51.1 mm; d1:51.1 mm; s1:36.3 mm; J:130 mm; S:18.8 mm;

C:36 mm; D:130 mm; T max.:100 °C; T min.:-40 °C; B:71 mm; C0:51.8 kN; C1:11.3 mm; Weight:2.65 kg; r:2; SW:5.56 mm;

Weight:2.08 kg; C:35.1 kN; A1:13 mm; A:41.6 mm; Recommended tightening torque for set screw:8 Nm; A2:56.6 mm; N:18mm; Designation of housing:FLE210-; e:24 mm; T max.:100 °C;

B:43.5 mm; L:135 mm; Designation of open end cover:SCO210-50; C:35.1 kN; S:10.9 mm; T min.:-20 °C; L1:40 mm; G:M6x1; Dz:100 mm; Weight:2.76 kg;

H2:107 mm; Designation of housing:PAE209-; d:42.86 mm; J:95.3 mm; H1:14 mm; d1:62 mm; B1:56.3 mm; A1:32 mm; C0:20.8 kN; T max.:100 °C;

Brand:NTN; Characteristic rolling element frequency, BSF:8.07 Hz; Fatigue limit load, Cu:0.06 kN; D:24 mm; Mass:0.007 kg; Max operating temperature, Tmax:120 °C; f0:15.8; Nlim (grease):26,000 rpm; Characteristic inner ring frequency, BPFI:7.86 Hz; Min operating temperature, Tmin:-20 °C;